9500749-02Printed in the U.S.A.Installation InstructionsPro Ripper Shifter1983-2003 Ford Mustangwith T-5, T-5 w/OD & T-45 TransmissionPart Number
STEP 1. Unscrew knob.PARTSButton-head Screws (4) STEP 2. Carefully unsnap shift boot from center console.TOOLS Socket(8mm,10mm,13mm)
STEP 5. Remove two (2) upper stick bolts. Tools: Drive, 10mm socket STEP 3. Unclip cigarette lighter wire harness. STEP 4. Remove four (4) bolts
STEP 7. Remove protective boot. STEP 8. Remove four (4) shifter base bolts. Tools: Drive, extension, and 13mm socket. STEP 9. Remove shifter bas
STEP 11. Thread jam nuts onto shift stops. Parts: Shift stop jam nuts (2) STEP 12. If a stiffer side-to-side action is desired, follow the next
STEP 18. Install four (4) washers and four (4) mounting nuts. Tools: Drive, extension, and 13mm socket Parts: Washers, Mounting nuts
STEP 20. Install protective rubber boot. STEP 21. Install four (4) bolts securing protective boot. Tools: Drive, extension, and 8mm socket STEP
STEP 26. Reconnect cigarette lighter wire harness. STEP 25. Install threaded knob adapter. NOTE: If adapter is installed as seen in picture, kn
STEP 28. Install knob. STEP 27. Install shift boot.
Comments to this Manuals