Bm 77101 STARTER, FORD, 3/8 DEPTH FLYWHEEL, 289, 302, User Manual

Browse online or download User Manual for For the car Bm 77101 STARTER, FORD, 3/8 DEPTH FLYWHEEL, 289, 302,. B&M 77101 STARTER, FORD, 3/8 DEPTH FLYWHEEL, 289, 302, 351W, 164 T MANUAL User Manual

  • Download
  • Add to my manuals
  • Print
  • Page
    / 5
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 0
Instructions
B&M StarTek Starter
(see www.bmracing.com for the latest vehicle fitment applications and model years)
Part Number 77100 (3/4” Depth) & 77101 (3/8” Depth)
Ford 289, 302, & 351W
© 2013 by B&M Racing and Performance Products
1 9500886-02
Proper installation of your StarTek
Starter is essential for trouble free
operation. Correct alignment and
spacing is required. Please read all
instructions before installing your
new high performance starter.
INTRODUCTION
This starter can be installed in about
an hour by carefully following the
instructions. It is suggested that the
vehicle be allowed to cool off for a
few hours to avoid burns from hot
parts, especially any exhaust parts
which might be near the starter. The
vehicle should be off the ground for
ease of installation - jack stands,
wheel ramps or a hoist will work
fine. MAKE SURE VEHICLE IS
FIRMLY SUPPORTED - DO NOT
WORK UNDER A VEHICLE IF IT IS
SUPPORTED BY ONLY A JACK!
Try to raise the vehicle 1-2 feet so
you will have plenty of room to work.
APPLICATION NOTES
When selecting a starter for your
particular Ford, year, model, and
drivetrain specifications can
sometimes be miss-leading.
B&M offers two starters of differing
pinion depth for particular Ford 289,
302, and 351W applications. Part
number 77100 is for 3/4” depth ring
gears, and part number 77101 is
for 3/8” depth ring gears. Please
see Figures 1 and 2 for
clarification, along with Table 1.
Figure
1
: Application Side View
Page view 0
1 2 3 4 5

Summary of Contents

Page 1 - B&M StarTek Starter

Instructions B&M StarTek Starter (see www.bmracing.com for the latest vehicle fitment applications and model years) Part Number 77100 (3/4” De

Page 2

2 INSTALLATION STEP 1. Disconnect the battery cables, removing the negative cable first. STEP 2. Remove the old starter, and make sure th

Page 3 - If Required

3 generally prevent you from being able to return your starter: With the installation procedure complete, start the engine several ti

Page 4

4 starter motor, it is important to size the wire in accordance to its length. Keep in mind to size all ground wires accordingly also

Page 5 - Table 2: Cable Gage Chart

5 STEP 9. Reconnect the battery terminals, starting with the positive and ending with the negative. STEP 10. Start the engine. In orde

Comments to this Manuals

No comments