The B&M QuickSilver shifter is a dual action shifter in-corporating straight gate operation and ratchet opera-tion in one mechanism. The styling a
holding Shift indicator plate. Remove Shift indicator plate.Step 2. Remove the control cable clips. Remove the four(4) shifter mounting bolts. Remove
If using stock shift cable, skip steps 10 to 13.STEP 10.From underneath the vehicle, install the B&Mselector lever in position on the transmissio
Step 14. Locate and identify the neutral start and reverselight wires on the stock wiring plug. Cut wires from plugthen strip 1/4" insulation off
SHIFTER OPERATIONThe B&M QuickSilver shifter combines a straight gateand a ratchet shifter into one mechanism. Refer to thefollowing instructions
Ratchet Shift ModeSwitching to Straight Gate ModeFigure #10 Figure #11Figure #8Figure #9Manual/AutomaticManualPull up firmlyon knobIndicator showsgear
BRACKET(1)LEVER(1)MICRO SWITCH(2)5/16-18 X 1.00" (2)M8-1.25 X 25MM (2)5/16-18 X 7/8"(4)CABLE SWIVEL(1)COTTER PIN(1)ELECTRICAL TERMINAL(4)1/
TOOL LIST(1) Floor Jack and Jack Stands (1) 13/32” Socket (1) 3/16” Hex Key(1) Phillips Screwdriver (1) 7/16” Socket (1) Wire Cutter(1) Micro Phillips
Comments to this Manuals